Spot welding is most commonly used for the joining of sheet metal. However, this process can be used for joining a wide variety of metals.
- Resistance welding equipment has many uses that many people often don't think about.
- Everyday items that some may not associate with resistance welding owe their very existence to this versatile process.
- To most manufacturers, spot welding is the most economical way to join two pieces of sheet metal.
- While joining sheet metal is the most common use for the process, resistance welding (RW) equipment actually can be used for a large variety of joining and heat-treating projects, some of which are not so well-known.
- Resistance Welding Annealing Annealing of production components often is required.
- Eighty-four individual spot welds are inside a four-slot toaster
- Joining Dissimilar Metals Using Percussion Welding
- The trick to this process is synchronization between the nail feed and the welding control.
- During destructive testing, the stamped part is gripped in a vise just below the pivot hole, and a hammer is applied to the side of the hardened ball.
To read the original article please click:
http://www.thefabricator.com/ResistanceWelding/ResistanceWelding_Article.cfm?ID=255 |
Article Details